We manufacture tapered porch columns as one piece from fiberglass reinforced polymer (FRP). Infused with marble dust, composite columns have a stone-like feel. They are in keeping with the look and feel of traditional classical architecture. These porch columns are hollow so they can be used as a decorative wrap if needed. And yet they feel and sound solid because of the hard dense nature of the porch column material.
Weatherproof, insect-proof, rot-proof, virtually maintenance free, pound for pound stronger than concrete, steel, or aluminum. This is the premier option for columns. Works great with either wood or synthetic balustrades. Interior or exterior use. Use acrylic-latex primer and paint for best results. Whole columns are load bearing. See capacity chart below. Round tapered shafts have a modified architectural entasis, with a Tuscan style astragal for authentic styling. This creates a very visually appealing and architecturally correct look.
Split Tapered Porch Columns:
Split/reassembled tapered porch columns are NOT load bearing. The idea of a split column is that it can be used around a supporting post, or as a pilaster against a wall. Optional Reassembly Kit available for those ordering split columns to be reassembled around an existing member. Includes necessary ties, spacers, and filler. Two kits are required or columns 14′ high and taller. No warranty provided on split columns.
Fluted Tapered Porch Columns:
The 12″ tapered porch column is available with “standard flutes” on the 8′, 9′, 10′ and 12′ lengths. There is 12″ of smooth shaft at the bottom before the flutes begin. The total height of the Tuscan Base is 6″ high, therefore the standard fluted columns can be trimmed on the bottom as much as 6″ without getting into the flutes. Custom fluting is available for projects that require column heights that do not fall into those specs.
Column Capitals and Bases:
Tuscan cap & base sets for 12″ WHOLE columns are “Timesaver” recycled ABS.
Tuscan cap & base sets for 12″ SPLIT columns are two-piece “E-Z Lock” polystyrene.
Other cap/base styles available, i.e. Attic, Doric, Corinthian, Scamozzi, etc., call for quote.
Every Cap & Base Set includes a Column Installation Kit. The Install Kit contains hardware to install round and square FRP columns in just about any application. Brackets are bolted to the column, then Tapcon screws attache the top brackets to the ceiling/soffit. Kit includes full instructions on installing FRP columns. If you are attaching wood railing to a round column, you’ll want to look at the Wood Rail to Round Column Hardware Kit.
Craftsman Pedestals available for these round tapered columns. Matching square and non-tapered columns available.
For CURRENT LEAD TIME and shipping transit time, click here.
Shipping cost is displayed in shopping cart.
For exact specs, load capacities, inside/outside dimensions, cap/base specs, & more, click Specifications below.
Limited Lifetime Warranty – never replace your columns again! Click Here for Warranty Information
Proudly Made in the USA.
For ProsDownload Product Drawings:
- Column Specifications PDF
- Column Installation Instructions.pdf
- Cap & Base Installation Instructions.pdf
- How To Attach Wood Railing to Round Columns PDF
- Reassembling Split Columns PDF
- Installing Split Columns as Pilasters PDF
- Installing Ornamental Capitals PDF
- More info on allowable loads.pdf
- Flame Spread Test Results PDF